Automotive Electronics
Enabling smarter mobility for the future.
Highly Reliable Thermal Interface Materials for Automotive Electronics
Electrification, connectivity and intelligence are driving profound change across the automotive industry and placing greater demands on thermal management. Zhenmorntek supplies a range of materials that meet the needs of the automotive industry.
Automotive Electronics Applications
Intelligent Thermal Management System
- Electric Water Pump
- Electric Oil Pump
- Electric Fan
- Electric Compressor
- PTC Heater
TGF 04030CE
Cost-Effective Two-Component Thermal Gap Fillers for Electric Water Pumps
- Low viscosity, high flow rate and easy application
- Low equipment wear
- Cost-effective, well suited to high-volume production
| Color |
Blue |
| Thermal Conductivity (W/m·K) |
4.0 |
| Minimum Bond Line Thickness (µm) |
100 |
| Recommended Operating Temperature (°C) |
-50~150 |
| Flame Rating |
V-0 |
Powertrain Domain
- Motor Controller
- DC/DC Converter
- OBC Controller
- PDU Controller
- BMS Controller
TPE 03510
Two-Component Thermal Encapsulants and Potting Materials for Onboard Chargers
- Low viscosity and efficient self-leveling
- Low siloxane volatilization
- Efficient thermal conduction and reliable protection
| Color |
White |
| Thermal Conductivity (W/m·K) |
3.5 |
| Viscosity (mPa·s) |
13,500 |
| Recommended Operating Temperature (°C) |
-50~150 |
| Flame Rating |
V-0 |
Body Domain
- Zone Controller
- Gateway Controller
- Lighting Controller
TGF 06030LV
Low-Volatility Two-Component Thermal Gap Fillers for Body Domain Controllers
- Low oil bleed and low volatility
- Efficient thermal conduction and high reliability
- Low viscosity for efficient large-scale application
| Color |
Blue |
| Thermal Conductivity (W/m·K) |
6.0 |
| Minimum Bond Line Thickness (µm) |
125 |
| Recommended Operating Temperature (°C) |
-50~150 |
| Flame Rating |
V-0 |
Chassis Domain
- Domain Controller
- Air Suspension Controller
- EPS Controller
- Steer-by-Wire Chassis Controller
TGF 02010LD
Low-Density Two-Component Thermal Gap Fillers for Air Suspension Controllers
- Low density
- Efficient thermal conduction and high reliability
- Low viscosity for efficient large-scale application
| Color |
White |
| Thermal Conductivity (W/m·K) |
2.0 |
| Minimum Bond Line Thickness (µm) |
125 |
| Recommended Operating Temperature (°C) |
-50~150 |
| Flame Rating |
V-0 |
Intelligent Driving Domain
- Domain Controller
- LiDAR
- Millimeter-Wave Radar
- Ultrasonic Radar
TLF 10020LV
Low-Volatility Thermal Gels for LiDAR
- High thermal conductivity for efficient heat transfer
- High flow rate and easy application
- High reliability, with no drying out over time
| Color |
Gray |
| Thermal Conductivity (W/m·K) |
10.0 |
| Minimum Bond Line Thickness (µm) |
150 |
| Recommended Operating Temperature (°C) |
-50~150 |
| Flame Rating |
V-0 |
Smart Cockpit Domain
- Domain Controller
- In-Vehicle Audio Amplifier Controller
- Electronic Mirror Controller
TCP 03010
Thermal Grease for In-Vehicle Audio Amplifier Controllers
- High thermal conductivity and low thermal resistance
- Low viscosity and high thixotropy
- High reliability, with no drying out over time
| Color |
White |
| Thermal Conductivity (W/m·K) |
3.0 |
| Thermal Resistance (°C·cm²/W), 50 psi |
0.13 |
| Minimum Bond Line Thickness (µm) |
20 |
| Recommended Operating Temperature (°C) |
-50~150 |
Our Strengths
-
Reliable in the Long Term
Our products are designed for long-term use in industrial applications, and every product is validated for long-term reliability.
-
Customized Solutions
Beyond our proven standard series, we can develop products better suited to your operating conditions, with support for small-batch trials.
-
Trusted Expertise
We put years of expertise into research, development and production to create solutions you can always rely on.
.jpg?v=20261016-arial)
